Livestock Tank Silo Hopper Farm Alloy Steel 4 leg kit
Tank Silo Farm weighing scale kit assembly 20,000 lb. New Tank, Silo Farm hopper, Bin storage scale kit assembly. All parts for a 4 legged system is in here. Made out of alloy Steel material. weighing element load cells are Environmentally sealed with 17′-20′ cable for indoor or outdoor environment use. Top plate is is 5″x5″ with 4x 1/2″ holes for easy mounting on your bin/hopper legs. 4 leg system to weigh up to 20,000 lb.
Spherical washer mount compensate for a little bit of tilting.
Indicator has a 1″ Red Segment LED display for easy view. Special setup for keeping the bin weight in flash memory. When you fill your Silo/Bin shows the actual weight, after you down with weighing out feed you turn the indicator Off. Next time when you turn it back On, will show you if you have some feed in your silo/bin.
Great to keep track of output. all parts are tested and manual is included for assembly and setup and calibration. However we do a pre-setup and pre-calibration at our shop to make sure all parts work properly before we ship the equipment out. Indicator works on AC power as it has its own power cord and also have a 6VDC Lead-Acid Battery for running the system up to 48 hrs. Mounting of the indicator is easy by using the “U” bracket that comes with the indicator. Quick disconnect plugs with 20’ft of cable included and pre-soldered.
You will receive the cable pre-connected into the summing box to make it easier for you.
maximum scale normal capacity is 20,000 lb you can set it up to minimum of 1 lb resolution. load cells are durable and have 100% safe overload built into them.
In Scale Kit:
(4) Alloy Steel environmentally sealed 5KSE load cell with 17-20′ cable
(4) SWM-5KSE Alloy Steel tank mount
(1) Stainless Steel Summing Box with full rubber gasket IP67
(1) Pre-made and connected home run 20ft cable
(1) XK3119 AC and battery powered Stainless Steel Indicator