T-Grip 10ft Scale pit to keep the dirt out
T-Grip belting will stop unwanted product from getting into a truck scale pit with it’s unique design. The “T” section will slip into the gap between the scale platform and the pit wall.
The gap must be 1/2″ or larger to avoid any scale binding. The exclusive grips on the vertical section of the “T” hold on to the pit wall and platform to help prevent the belting from being pulled out with the normal flow of traffic.
The T-Grip belting is installed around the perimeter of the scale platform. To allow ventilation, a gap of 8 ” to 12″ can be left on the sides where there is little chance of product spillage.
T belting is 5-3/4″ wide and 1/4″ thick at top. The vertical is 2-1/4″ high and 7/16″ thick.