The LCT-11 is a stand-alone hand-held device that was especially
designed for full trouble shooting of strain-gage based load cells.
The LCT-11 can check all common types of standard load cells that are available
on the market: 4 or 6 wires at all rated gain outputs. It provides the user with all
essential data needed about the tested load-cell: bridge resistance and integrity,
physical distortion (possibly caused by overload, shock load or metal fatigue) and
it checks the insulation resistance that can point to moisture or chemical ingress.

Features

• Quick testing of strain gauge load cells and scales
• Determination of the load distribution in multiple load cell scales
• Testing for linearity and reproducibility by continuous measurement process
• Very user- friendly interface , complete test within 5 s
• 2- line alphanumeric display with 16 characters
• Rugged ABS plastic housing
• 8- pin connector with Kabelan - connection by screw (included )
• Uses standard batteries 4 x AA (not included)
• Dimensions: 150 mm x 80 mm x 28 mm
• Weight: 250 g

Technical Details

• Testing of the measuring bridge with 1.25 V DC and 10 V DC insulation test with
• Measurement of input and output resistance : Up to 5 ohms at 0.5 ± 0.5 Ω Ω resolution and accuracy
• 16 -bit A / D converter
• Sense - Resistance ( for 6-wire WZ) : Up to 500 Ω at 0.1 Ω resolution
• Insulation resistance: Up to 5 Gohms with 10% accuracy (min > 10 M ).
• The load cell signal relative to LC - Rated load: ± 250% at 0.01 % resolution and 0.1% accuracy ( input resistance > 175 Ω )
• Input - sensitivity : 0.1 ... 5 mV / V in steps of 0.01
  SpecificationManufacturer

The post LCT-11 load cell tester appeared first on The Load Cell Depot.